Heat pump systems for homes
We had to make so many decisions when we built our new construction home. I didn’t realize it at the time (having never built a home before), but perhaps our most important decision-making centered around the HVAC system.
The trend in new construction these days is toward energy efficiency, and we were completely on board with that. And living where we do on the Delmarva peninsula, where there is currently no access to natural gas, efficiency is exceptionally important. Most heating systems here are driven by electric or propane. (There are some geothermal systems in the area but not many.)
Propane is very expensive—at least a third more than natural gas—so most people in the area opt for electric heat pumps. The only problem is that electric heat pumps do not work efficiently once the temperature drops below 40 degrees Fahrenheit. We don’t live in a frigid climate, but we do get cold weather. And our experience living in rentals with electric heat pumps wasn’t entirely favorable.
So we opted for a hybrid heat pump system—a dual fuel, dual fan-speed unit from Amana. We now get the best of what electric and propane can offer.
When it’s above 40 degrees (the temperature threshold is programmable), our furnace uses the electric heat pump to warm our home. And when it drops down below 40, the alternative propane portion of the unit kicks in to do the heating.
During our home planning phase, we estimated this hybrid heat pump system would save us $1, 200 to $1, 500 a year in fuel costs over a conventional propane gas-only furnace. That’s a big deal!
In addition to the dual fuel option, we also went with a dual fan system. When it’s relatively mild, and the house only needs to warm up by 10 or 15 degrees, the furnace conserves energy by using the lower fan speed. When it’s really frigid, the higher speed setting kicks in to get the warm air moving faster to where it needs to go.
You might also like


![]() |
3 Ton 13 Seer Goodman Heat Pump System - GSZ130361 - ARUF36C14 Home (Goodman)
|