Using the supplied hose clamps

Heat Exchanger pump

1) What is a Heat Pump?
A heat pump is a device that is able to transfer heat from one fluid at a lower temperature to another at a higher temperature.
Heat pumps owe their name to the fact that they allow heat to be carried from a lower to a higher temperature level, inverting natural heat flow which - as is well known - in nature tends to be from a higher to a lower temperature.
The function of the heat pump may therefore be compared to that of a water pump positioned between two water basins that are connected to each other but which are located at different altitudes: water will naturally flow from the higher to the lower basin. It is, however, possible to return water to the higher basin by using a pump, which draws water from the lower one.

2) What it is and how it works
A heat pump consists of a closed circuit through which a special fluid (refrigerant) flows. This fluid takes on a liquid or gaseous state according to temperature and pressure conditions. This closed circuit consists of:

Electric Heat Pump Gas Absorption Heat Pump
a compressor a generator
an absorber
a condenser
an expansion valve a series of restrictors
an evaporator

The condenser and the evaporator consist of heat exchangers, i.e. special tubes placed in contact with service fluids (which may be water or air) in which the refrigerant flows. The latter transfers heat to the condenser (the high temperature side) and takes it away from the evaporator (the low temperature side).

During operation, the refrigerant, inside the circuit, undergoes the following transformations:

Condensation: refrigerant flowing from the compressor passes from a gaseous to liquid state, giving off heat to the outside Condensation: refrigerant flowing from the generator passes from a gaseous to liquid state, giving off heat to the external fluid (water or air)
Expansion: passing through the expansion valve, the liquid refrigerant cools and is partially transformed into vapour Expansion: passing through the restrictors, i.e. suitably calibrated narrowings, the refrigerant is cooled
Evaporation: the refrigerant absorbs heat and evaporates completely Evaporation: the refrigerant absorbs heat from the external fluid (water or air) and evaporates completely, returning to a gaseous state
Compression: the refrigerant, in a gaseous state and at low pressure, coming from the evaporator, is taken to a high pressure; during compression it is heated, absorbing a certain amount of heat Absorber: the refrigerant is absorbed by an absorbing fluid, making it liquid once more
Generator: the liquid solution of the refrigerant and absorbing is heated in the generator by means of a gas burner, separating the refrigerant, which evaporates, increasing in temperature and pressure
All of these transformations together make up the electric heat pump’s cycle: the compressor provides the refrigerant with energy, the refrigerant absorbs heat in the evaporator from the surrounding medium, and through the condenser, transfers it to the medium to be heated All of these transformations together make up the gas heat pump’s cycle: by supplying energy with the gas burner (methane/LPG) the refrigerant in the evaporator absorbs heat from the external fluid and, through the condenser, transfers it to the medium to be heated
Traffic stats
You might also like
KAMAT- Pumpen: Heat Exchanger Cleaning
KAMAT- Pumpen: Heat Exchanger Cleaning
Rocket Stove - Pumpless Hot Water Heater/Heat Exchanger
Rocket Stove - Pumpless Hot Water Heater/Heat Exchanger
Pool Pump room explained: Heat exchanger, sand filter
Pool Pump room explained: Heat exchanger, sand filter ...
CXRacing Aluminum Heat Exchanger Water to Air Intercooler And Water Pump
Automotive Parts and Accessories (CXRacing)
  • Heat Exchanger: Overall size:14.25 (Wide) x18 (Height-With cap) x2 (Thick) inch
  • Heat Exchanger: Core Size:14x14x1.65 inch
  • Water to Air Intercooler: Overall Size:5 x5 x15
  • Water to Air Intercooler: Core Size:4 x4 x10
  • Water Pump: 12VDC
GENUINE MERCEDES Mercedes w203 Cooling Pipe Power Steering Fluid cooler radiator heat exchanger
Automotive Parts and Accessories (GENUINE MERCEDES)
  • Cooling Pipe for Power Steering Fluid
  • Genuine Mercedes part, recently made: not been lying around.
  • Mercedes part# 203 460 56 24, check fit below.
  • NOTE: Also Use- (1) 203 466 72 81 Power Steering Hose (1) 203 466 73 81 Power Steering Hose, NOT included, email us.
CXRacing Intercooler SuperCharger water Coolant Pump SVT Mustang
Automotive Parts and Accessories (CXRacing)
  • 12V DC Water /Coolant Pump for Radiator/Heat Exchanger. Perfect for Air to water Intercooler, Super Charger Applications.
  • Volume: 30L/Min (8 Gal/Min)- Inlet outlet: 3/4 (O.D.)- 9500rpm Brushless Motor- Voltage: 12V DC- Current: 2.8A±10%- Capacity: 30L/Min (8 Gal/Min or 480Gal/Hr)...
Related Posts